WELCOME TO OUR BLOG
We're sharing knowledgein the areas which fascinate us the most
click

Food-Contact Colorant Paperwork and Sample Trials for PET Bottles

By colorwayglobal November 13th, 2026 7 reviews

Introduction: Food-contact paperwork and a bottle-line sample trial turn a promising custom PET shade into a color the packaging team can approve with confidence.

The target shade, color card, and food-contact certificate are starting materials, not the decision. The decision depends on matching documents to the exact shade and bottle, then confirming on your line that the color runs cleanly. That evidence determines whether supplier discussions should continue.

Why Food-Contact PET Color Needs a Different Review From General Bottle Color

For a household cleaner or a shampoo bottle, color is mostly a look-and-process question. Does the shade match the brand standard, does it disperse, and does it survive the melt? For a beverage bottle, the same question sits inside a compliance file that brand quality teams, retailers, and market regulators will ask about. Food-contact status is tied to what the colorant is made of, how much of it ends up in the finished article, and what that article will hold. An aqueous drink at room temperature is a different case from a hot-filled acidic juice or a dairy product with a long shelf life. That is why a food bottle review starts from the colorant's composition, not from how the shade looks. Two suppliers can offer the same-looking red built from different pigment systems; one may be supported for food-contact use while the other was developed for a different use. A liquid colorant manufacturer should be able to explain how those composition and use-level facts relate to your beverage application. Migration review looks at substances that can move from the bottle wall into the drink, so composition and use level both matter. US rules for colorants in polymers sit in 21 CFR 178.3297; the EU assesses substances through EFSA and the plastics regulation framework; China's GB standards apply for the domestic market. PET adds its own process conditions to that picture. Colorant passes through high melt temperatures in injection, then a reheat and stretch blow, then a thin bottle wall where any dispersion problem becomes visible. In lightweight bottles, the color is judged through a wall that may be well under a millimeter thick, so streaks and specks show up faster than they would in a heavy jar. Food-contact review and bottle-line performance are linked: the same shade has to clear the document side and hold its appearance on the line.

How to Match Food-Contact Paperwork to the PET Bottle Application

Document review starts with the application, not with the folder of certificates. The same colorant can be routine in one bottle and need a closer look in another, because the application defines which questions the file has to answer. Resin choice comes first — virgin PET and rPET behave differently in the melt and in the finished wall, and a shade developed on virgin resin gets checked again on the recycled blend you actually run. The fill comes next: water, carbonated soft drink, juice, tea, dairy, and edible oil each set different contact conditions and different shelf-life expectations. Market matters too, since a bottle sold in the US, the EU, and China may need files that speak to three different regulatory systems.

1. Which Paperwork Should Be Tied to Each Custom Shade

Ask for the document set tied to the shade code you plan to run. Company certificates are useful background, but the approval file should identify the substances in the colorant, name the regulation and conditions of use it covers, include migration test data where the application calls for it, and carry a revision or batch reference so the paperwork you approve matches the material you receive. Company-level qualification is background; shade-level review is specific. ColorWay Colorants holds FDA, EFSA, and GB food-contact qualification background as a plastic colorant manufacturer focused on PET packaging. Each custom shade is then handled color by color, with supporting documents discussed for that color and application.

2. How Sample Trials Show Whether the Line Can Run the Color

A trial answers three questions at once: does the shade land on the actual bottle, does it hold through the process, and can the line run it without generating extra scrap. Run the trial on your own resin and your own machine settings, and evaluate both the preform and the blown bottle. A shade that looks right in a thick preform section can drift once the wall is stretched thin. Run long enough to reach steady state after start-up so early transition material is not judged as production color. Record the machine, cycle, addition setting, and the measured color value at the wall section your brand team uses for approval. Those records support a productive next-batch discussion with the supplier.

What to Send a Supplier Before Asking for a Food-Contact Sample

A food-contact sample request needs more than a shade reference. A PET liquid colorant is matched to a resin, a process, and a contact application. The supplier needs those three details before shade work means anything. Tell the supplier the PET grade and whether the bottle uses virgin resin, rPET, or a blend, and give the ratio if a recycled component is involved. Describe the bottle: capacity, wall thickness, whether it is clear or opaque, and which part of the wall the brand judges color on. State the fill and how the package is used — room-temperature water, hot fill, pasteurized juice, carbonated soft drink under pressure, dairy with a long shelf life, edible oil — because contact conditions shape the migration questions the file has to answer. The commercial side belongs in the same message. Name the markets where the bottle will be sold, since a US launch, an EU launch, and a China launch each point to a different regulatory file. Give a realistic annual or campaign volume so the supplier can confirm the material can be produced at that scale, and say how many preforms or bottles you plan to evaluate in the trial. Add the equipment detail that matters for a liquid system: which machine the color will run on and what addition or metering setup is available on the line. With that package, a PET liquid colorant manufacturer can return a sample plan and the food-contact documents that fit the shade.

Conclusion

Food-contact work on a PET bottle color becomes manageable when two tracks run together: a document set tied to the exact shade and application, and a sample trial on your own resin and line. With both, the decision is clear: either the paperwork matches the bottle you are launching and the color runs on your equipment, or you continue evaluating alternatives. Send us the resin grade, target shade, fill, market, and trial plan, and we will respond with the sample and the color-specific food-contact documents for that shade.

FAQ

Q: What food-contact paperwork should a beverage brand request for a custom PET bottle color?

A: Request the set tied to the specific shade code: a composition or regulatory statement identifying the substances in the colorant, a food-contact compliance statement naming the regulation and use conditions it covers, migration test data where the application requires it, and a revision or batch reference. Pair it with your intended use details — resin, fill, contact conditions, and market — so the documents can be checked against the bottle application.

Q: Does a company-level FDA or EFSA qualification cover every custom shade?

A: Company-level qualification is the starting point; shade-level documents complete the review. A manufacturer's FDA, EFSA, and GB food-contact background shows the systems and documentation are in place; each custom shade is then reviewed against its own composition and intended use. Ask for the document set for the exact color and application you plan to run.

Q: What sample details help evaluate a food-contact PET liquid colorant on a bottle line?

A: Record the resin grade and virgin/rPET ratio, the machine and cycle settings, the addition setting used, and the wall section where color is measured. Keep preform and blown-bottle samples from steady-state running rather than the start-up transition, and note measured color values alongside a visual check for streaks or haze. Those details let both sides compare batches and repeat the result.

Sources / References

CFR - Code of Federal Regulations Title 21

Determining the Regulatory Status of Components of a Food Contact Material - FDA

Food contact materials - EFSA

Related Examples

ColorWay Liquid Colorant for Plastics

Previous
PET Bottle Color Choices and Their Effect on Recycling Sorting
Read More
Next
Low Letdown Ratio Liquid Colorant for PET Preform Metering
Read More
Leave a message
First Name*
Last Name*
Email*
Your Country*
Company Name*
Mobile Number
Message*
Thank you for your interest. We greatly value the opportunity to occasionally update you on our products, services, and content that may align with your interests.
To proceed, please tick the checkbox below to continue.
I consent to being contacted by ColorWay Global using the provided information for purposes related to products, services, and other relevant content, including the requested brochure and newsletters.
We care about your privacy and want to protect it. To learn how we handle your data, please read our Privacy Policy.