Introduction: A beverage color project moves faster when the brand and the PET converter can give the liquid colorant supplier a precise colorant name plus a physical reference that shows how the target color should behave inside a transparent PET wall.
Most packaging color work begins with a color the team already knows: the inside of a competitor’s bottle, a closure, a printed chip, or a shade from a design review. For a PET bottle, that color must survive preform injection, stretch blow molding, and retail lighting, usually with the beverage directly behind the wall. The practical question is which shade to select and what details will help the formulator put the first trial on target. A short brief that records the beverage type, bottle geometry, transparency level, and target market closes that gap before preform line trials begin.
A water bottle is judged mainly by clarity. Shoppers associate a clear sidewall with purity, so the custom shade is often a pale tint or a barely visible cool tone that keeps the bottle looking glassy. In this scenario the addition ratio matters as much as the hue, because too heavy a dose can create haze and reduce the resin’s natural transparency. A juice bottle sets the opposite task. Juice packaging needs shelf presence, appetite appeal, and often light protection, which normally means a deeper, more saturated wall and, in many cases, a strongly translucent or opaque container. Pigment particles are the right route there because they absorb and scatter light rather than only tinting the polymer from within. When the goal is a dense orange or red, the development discussion shifts from “how clear should this stay” to “how much coverage and intensity does this bottle need to carry. ” A tea bottle sits between those two jobs. Most tea drinks need a transparent amber or golden color that reads brewed rather than syrupy, so the formulator has to balance colorant load, opacity, and the resin’s base tone in one formulation. The chemistry behind that range explains why the scenario is the real starting point of a custom brief. Dyes dissolve into the polymer matrix and color it while preserving light transmission, which suits transparent bottle walls. Pigments remain as finely dispersed particles that scatter light and produce opacity or hiding. The same liquid colorant system can be developed for either mechanism, but the supplier can make that choice only after the finished bottle’s visual job is clear. PET resin also carries its own subtle base color, and wall thickness controls how visible that tone becomes. A thin water bottle and a heavy contoured juice bottle will not present the same formula in the same way even when the chemistry is identical, so the wall profile belongs in the color specification instead of being treated as a secondary manufacturing detail.
A useful custom color brief carries two kinds of information: the name of the colorant chemistry and a physical object that can be inspected. The name keeps the technical conversation accurate, while the object keeps the target from drifting into subjective impressions. ColorWay develops each liquid PET colorant through project-specific technical communication, so the laboratory starts with the reference supplied by the brand and the conditions around that reference. A project-specific starting point gives the formulator a concrete development direction without waiting for a standard shade list that may not match the application.
The Colour Index is a shared naming system used by pigment and dye manufacturers. It lets a buyer and a supplier refer to the same pigment or dye family without relying on regional trade names. When a brief names a Colour Index pigment, the formulator immediately knows which chemical class is under discussion and can begin evaluating whether that class is suitable for PET, how it will behave in a liquid dispersion, and which hue characteristics it should deliver. This shared vocabulary matters because colorant suppliers do not all describe their products in the same way. A Colour Index reference defines the identity of the colorant, but the finished bottle appearance is determined by what happens inside the PET wall. The final perceived color is influenced by the addition ratio, wall thickness, bottle geometry, any light-scattering particles in the formula, and the resin’s own base tone. For a PET bottle that will be held up to light, a printed chip can name the hue family, while a molded trial shows how the colorant actually performs in a transparent wall. The Colour Index therefore narrows the chemistry; the trial sample confirms the packaging visual result.
A physical sample anchors the custom PET color brief. Descriptions such as “bright” or “deep” can be interpreted differently by every person in the discussion, but a formulator who can hold the actual bottle, closure, or molded chip can judge three qualities at the same time: how saturated the color should be in the plastic, how dark or light the color should read through the bottle wall, and how much of the PET resin’s natural base tint should remain visible. A printed chip is a useful starting point, yet it has a white backing and no information about transparent PET. A real reference bottle shows how the color behaves in three dimensions, how the shade appears in a thin neck area versus a thick sidewall, and how much light passes through the container. That physical context is especially important for juice and water bottles because the same pigment can look completely different at different wall thicknesses. The strongest submission for a custom liquid colorant brief is therefore a Colour Index reference plus one physical sample that can sit on the lab bench. Together they give the colorist a visual target rather than an interpretation.
The first development stage should be deliberately narrow. The supplier reviews the brand reference, the project description, and the relevant substrate information, then prepares an initial formula for evaluation. The goal is not to solve the production color on the first attempt. The goal is to show whether the requested color direction is reachable in that PET bottle format and what it will take to reach it. During this stage the formulator tests the pigment or dye combination, establishes a practical addition ratio, and checks whether the color stays uniform at that ratio. Because liquid colorants are metered precisely and develop color quickly, adjustments between trial formulas can be made in controlled steps. The first trial can therefore compare low concentrations suitable for transparent water and tea bottles with higher concentrations suitable for opaque or deeply saturated juice containers. The same liquid system supports both directions, but the development path differs because the visual work differs. Wall profile also belongs in the evaluation: a thin stretch-blow-molded sidewall and a thicker preform section can show the same formula at different apparent depth, so the supplier needs to inspect the bottle geometry before judging the result. Regulatory review belongs in this same stage as a practical scope check. If the bottle will contact water, juice, or tea and will be sold in markets governed by FDA, EFSA, or GB rules, the food-contact suitability of the specific formula is worth checking against the supplier’s official technical documentation. Each custom shade is confirmed separately, because the result depends on the exact pigment, carrier, addition ratio, and food type. Submitting the intended final beverage, the target markets, and the physical reference sample with the first brief gives the development project a clear technical and compliance direction.
A custom PET bottle color becomes predictable when the brand and the supplier are examining the same object. Water bottles reward restraint and clarity, juice bottles reward saturation and coverage, and tea bottles reward a transparent tone that still looks natural in PET. The brand team’s role is to provide a reference the supplier can handle plus the context around it: beverage type, bottle shape, transparency level, and the regulatory region of sale. For ColorWay liquid PET colorants, development starts with this project-specific technical conversation. Send the bottle or shade you want to match, describe the product it will hold, and note the target market for regulatory review; the discussion then begins with the visual job the PET bottle has to perform.
A:A Colour Index reference tells the supplier which pigment or dye family is under discussion and provides shared technical vocabulary before trials begin. A physical sample then shows what the target must become in PET: how saturated the plastic should be, how much depth the wall should carry, and how much of the resin’s base tone should remain visible.
A:The formulator needs to know whether the finished container should be transparent, translucent, or opaque, because each route uses a different colorant approach. Transparent water and tea bottles need colorants that preserve light transmission and avoid haze, while juice containers that must hide the product need pigment systems that scatter light and build coverage.
A:The supplier reads the brand reference together with project information such as intended beverage, bottle geometry, transparency level, and target market.
Anti-blocking of polymer films
Polyethylene terephthalate (PET)